Open the simulatorOur 78 encaustic tile colours
The colour of an encaustic cement tile runs through its body: pigments mixed with cement, sand and marble powder. It develops as the tile dries and varies slightly from one tile to the next; on a floor of plain tiles, these variations are what you see. A colour is never quite the same in the morning and in the evening: the light in a room shifts it, and that is what makes a coloured encaustic tile so alive. Each colour has a code: A1 for black, A9 for chalk white, E4 for brick red… Our colour pages cover each family:
blues,
greens,
greys, beiges,
yellows, reds,
pinks,
black and
whites.
These variations come with a tile made by hand, piece by piece: it is best to have seen them before you order, as no screen ever shows a colour accurately. Order samples, or come and see all 78 colours in our
showrooms in Paris and Avignon.

A1

A2

A3

A4

A5

A6

A7

A8

A11

A10

A9

B1

B2

B3

B4

BH2

B5

B6

B7

B8

B9

BH1

C1

C2

C3

C4

C5

C6

C7

C8

C9

D1

D2

D3

D4

D5

D6

D7

D8

D9

35

E1

E2

E3

E4

E5

E6

E7

E8

E9

F1

F2

F3

8

F4

F5

F6

F7

F8

F9

G1

G2

G3

G4

G5

G6

G7

G8

G9

H1

H2

H3

H4

H5

H6

H7

H8

H9
Open the simulatorOur encaustic tile formats
The 20x20 cm format is the most common. The format changes everything: it takes 25 tiles in 20x20 to cover a square metre, 44 in 15x15, a hundred in 10x10. The smaller the tile, the more the pattern repeats and the tighter the design. These are the formats we make in our workshop: squares, octagon,
hexagons, diamonds, rectangles. Each pattern exists in its own format; another format can be made on request, with a mould cut to the size you need. And when we reproduce an old tile, we match its exact format too. We also invent our own shapes, such as the cross, the rounded cross and the round, gathered in our
plain tiles collection.
Patterned or plain encaustic tiles

Square 20x20

Square 17.5x17.5

Square 17.3x17.3

Square 16.7x16.7

Square 16.5x16.5

Square 15.5x15.5

Square 15x15

Square 14x14

Square 10x10

Square 7.5x7.5

Square 7x7

Skirting 10x20

Octagonal 20x20

Hexagonal 20x23

Hexagonal 18.3x16

Diamond 25x14.5

Diamond 20x14

Diamond 20x11.5

Diamond 15x8.5

Rectangle 10x20

Rectangle 15x7.5

Rectangle 14x7
All our encaustic cement tiles can be made in 2 thicknesses: 16 mm for floors and 12 mm for walls.
Open the simulatorChoosing a pattern
Every colour needs a design. Our patterns fall into three families: the
great classics, chosen by time itself;
Maison Bahya designs, drawn in-house; and the
collections of our guest designers. And if the pattern you have in mind does not exist yet, we create it with you: this is our
bespoke service. We also reproduce
old encaustic tiles.
The story of the encaustic tile
The encaustic cement tile was born in the mid-19th century. In Viviers, in the Ardèche, two residents, Étienne Larmande and Louis-François Damon, filed patents in the 1850s and 1860s for making coloured tiles from compressed cement, without firing: it was then called the carreau-mosaïque. At the same time, Spain developed its own mosaico hidráulico, shown at the 1867 Exposition Universelle in Paris as an alternative to marble.
It spread to Provence, Catalonia and North Africa, then far beyond. It covered the floors of homes until the 1960s, before industrial ceramics gradually replaced it. Today it is back, made just as it was then: by hand, one tile after another.
A tile coloured through its body
Our encaustic cement tiles have been made in our workshop since 2015, by hand, one by one. They never go into a kiln: they dry for several days before being shipped.
Step inside our workshopThe colour runs through the whole top layer of the tile, the wear layer, rather than being painted on the surface. That is what gives encaustic tiles their deep colours, and what allows them to be restored: a worn tile can be sanded, and the design reappears beneath the surface.
Large repeating patterns made their reputation; plain tiles have their own vibrant shades, which develop a patina over time.
Can encaustic tiles be used in a shower?
We advise against it, on the walls as on the floor of the shower. Every shower leaves limescale behind, and the descaler that removes it attacks the cement. See
what we recommend for a shower: zellige.
Can encaustic tiles be laid outdoors?
We do not recommend it: encaustic cement tiles are not frost-resistant, UV and acid rain can alter their colours, and tannin from leaves stains them brown. See
what we recommend for outdoor use.
How thick are the tiles?
For floors, we make only 16 mm tiles. As the adhesive adds 3 to 4 mm, allow a total depth of about 2 cm. For walls, as the material is heavy, we use a reduced thickness of 12 mm, which can be particularly suitable for plasterboard walls.
Open the simulator